Steinel Afstandsbediening RCS1 COM1

Omschrijving van de functies/buttons

Reach adjustment

Reach can be set directly using the percentage buttons and additionally increased by pressing + and reduced by pressing – (in 5% steps).

Stay-ON time

The buttons for stay-ON time can be set to the fixed, programmed values. In addition, the stay-ON time can also be increased and reduced via the + and – buttons. The + button Increases the stay-ON time by 10 s to 1 min, then in 1 min increments to a maximum of 60 min. The – button shortens the stay-ON time by 1 min down to 1 min, then by 10 s down to a minimum of 10 s.

Activation basis

The sensor's response threshold can be set to the fixed, programmed values via the symbol buttons. The "Teach" button sets the light level currently measured as the response threshold.

Test / Burn in / Reset

Pressing the Test button activates the test mode. In this mode, the stay-ON time is 5 seconds and the light level is ignored. The test mode is exited automatically 2 minutes after it is activated and the sensor switches to automatic mode. The burn-in function is activated by pressing the "Burn in" button. The Reset button returns the values to factory setting.